GLASS DRILLING MACHINE

 

​

For its installation and operation a free area of ​​4.00 m long, 4.00 m wide and 3.00 m high is recommended and the installation surface is as level as possible, although the machine has leveling plates and screws. Requires three-phase alternating current (three current cables and one neutral) of 220 V and 60 Hz.
In case of not having this service, the client must contract it with C.F.E. Before installation, the customer must have prepared the general switch, the individual switches and the wiring to the installation site. The gauge of the wiring depends on the distance and location of the equipment and it is recommended to verify with the technical equipment.
Although the machine has a pump and water recycling tub, we recommend that there is a water outlet not too far away for your request. This is not indispensable. The drill requires an air compressor of 5 Hp or greater, installed and connected, with pipes, hoses, connectors and valves necessary for proper operation.